A Step-by-Step Guide to Changing Kidney Grilles on a BMW E92 M3
The kidney grilles are one of the most prominent styling elements on a BMW, adding character and distinction to the front fascia. If you own a BMW E92 M3 and want to personalize its appearance, changing the kidney grilles is a simple and effective modification. In this blog post, we will provide you with a step-by-step guide on how to change the kidney grilles on your BMW E92 M3, allowing you to give your car a fresh, custom look.
Shop E9x Kidney Grills here:
Tools and Materials Needed:
- Flathead screwdriver or plastic trim removal tool
- Torx or Allen wrench set
- New kidney grilles (compatible with the BMW E92 M3 model)
Step 1: Prepare the Workspace
Start by parking your BMW E92 M3 in a well-lit and spacious area. Make sure the engine is turned off and the car is cool to the touch. This will prevent any accidental damage and ensure your safety throughout the process.
Step 2: Remove the Old Kidney Grilles
Open the hood and locate the kidney grilles on the front fascia. To remove the old grilles, gently insert a flathead screwdriver or a plastic trim removal tool into the slots located on the grille's edges. Apply gentle pressure and carefully pry the grille away from the retaining clips. Repeat the process for both the left and right grilles until they are completely detached from the car.
Step 3: Disconnect Wiring (if applicable)
In some cases, there may be wiring connections for features like parking sensors or adaptive cruise control located behind the kidney grilles. If your E92 M3 is equipped with such features, carefully disconnect the wiring harnesses before fully removing the grilles. Refer to your vehicle's owner's manual or consult an expert if you are unsure about the wiring connections.
Step 4: Install the New Kidney Grilles
Take the new kidney grilles that are compatible with the BMW E92 M3 and align them with the mounting points on the front fascia. Ensure that the clips on the back of the grilles align with the corresponding slots on the car. Gently push the grilles into place, making sure they are securely seated. If there are wiring connections, reconnect them as necessary.
Step 5: Secure the Grilles
Once the new kidney grilles are in position, use the provided Torx or Allen wrench to tighten the screws or clips that hold them in place. Carefully tighten them, ensuring a snug fit but avoiding over-tightening, which could lead to damage.
Step 6: Test and Inspect
Close the hood of your BMW E92 M3 and take a step back to admire the fresh new look. Check that the kidney grilles are securely attached and properly aligned. Additionally, double-check that any wiring connections, if applicable, are properly reconnected and functioning as intended.
Changing the kidney grilles on your BMW E92 M3 is a relatively straightforward process that can be completed with basic tools and a little patience. By following this step-by-step guide, you can transform the appearance of your car and add a touch of personalization. Remember to choose kidney grilles that are compatible with your specific BMW E92 M3 model and take your time to ensure a precise installation. With the new kidney grilles in place, you'll give your E92 M3 a refreshed and customized look that reflects your unique style.