The carbon fiber sideskirt extensions add the perfect amount of flare to side profile of the BMW F30. Such a wildly underrated modification in my opinion! I specifically like these SS extensions because they look very OEM+ and the fitment is absolutely perfect. Carbon weave looks great and the for the price you really cant beat them.

You can pick up these particular sideskirt extensions HERE:

Install is very easy, here’s what you will need:

• A drill - Buy Here

• A Jack (Easier to get under car) - Buy Here

• Self tapping screws - These generally are supplied

• 3M Tape - Buy Here

Alright, lets get started.

First off, this is WAYY easier with two people. It can be done alone, but help is always nice.

Clean the bottom of the sideskirt with some isopropyl alcohol, we want a clean contact point so the 3M forms a nice strong bond.

Grab a marker and make a mark where you will be drilling, 5 or 6 screws will be plenty. Generally 12” apart or so!

Lets smoke some holes! Grab a drill bit that is just a tad smaller than the screw itself. The goal is to create pilot holes not holes that the screw will fit into. Carefully drill out all of your holes!

Time to lay the 3M down, from one end to the other.

Expose the 3M tape, align each edge of the extension with each edge of the sideskirt. This is way easier with two people. Then press the extension onto the sideskirt. Hold firmly for about 20 seconds. Now we can pilot in our self tapping screws.

Voila, all finished!

You can watch my full install video here: